Make a connection with Teamspeak D.I.G. Server.
In order to speak with your Friends, HAM radio license, CB radio users, you need to connect to a Teamspeak2 server.
Using the client's addressbook:
Open the menu 'Connection' and press 'Connect'.
Your local addressbook is still empty but we are going to add a server here. Press your right mouse button in the white left section and click on 'Add server'.
You can name the server anything you like or use DIG DX Group. After that, the 'Label' shows your previous chosen name.
Now fill in the server address in the specified field, this may either be an IP address or a FQDN (Fully Qualified Domain Name). The port of the server usually doesnr17;t need to be filled in. However if the server host is running multiple servers you can specify the port where it needs to connect to behind the server addres (i.e. 80.69.72.240:8888).
After that you can choose a nick in 'Nickname'. You are obligated to fill one in unless you checked the 'Allow server to assign nickname' box in which case you will get a name like 'Guest1'.
If the server is password protected you need to fill the appropiate one in at the 'Password' field. If you are bugged by time-outs (unwanted disconnects from the server) check the 'Auto-reconnect' box.
If you have registered with the server before you can optionally fill in your username and password. Do not fill in anything if you haven't registered with the server before! Remember to check 'Registered' and fill in some nickname!
You may even fill in your favorite channel or sub-channel you wish to connect to.
After that hit the 'Connect' button at the bottom. If all went well you are now connected to the server. You should see your name with a green light next to it.
To connect with the Delta India Golf DX Group server we advice this to use:
Label: DIG DX group
Server Address: 80.69.72.240:8888
Nickname: (your first name and/or ham call)
Allow server to assign a nickname: yes
Login Name: leave it blank ones in the server you get one when you'r registered.
User Password: (leave it blank)
Auto-Reconnect: (leave it blank)
When you click Connect and a system admin is inside he will register you with the server and you get your personal Login and Passwd.
See you soon inside.
Now its time to click Connect
Geplaatst door PA3FBL
op 02 October 2006 14:03:44
6152 keer gelezen ·
Inloggen
Welkom op onze website! Geregistreerde gebruikers hebben meer privileges!Wachtwoord vergeten? Vraag hier om een nieuw wachtwoord.
Converted to v7 by WhoCare
Log in Zone
